Spa Experience Premium Shower Filter

Bath & Shower Filters

Did you know that your body absorbs more chlorine through the skin and lungs while showering than while drinking tap water? This can irritate your lungs and have seriously harmful side effects over time. Chlorine also strips protein from your skin and hair, leaving it dry and itchy. Get relief with an Enviro Products Shower Filter! New Wave Enviro’s Premium and Designer shower filter systems come with an optional aroma therapy diffuser in each package at no additional charge.  The diffuser ring will hold an aroma chosen by consumers and installs easily around the outside of the filter housing, the heat and steam from the shower water will warm the aroma for a genuine “Spa Experience” with every shower.  Our shower filters contain 16oz of KDF-55 and 2oz. Removing chlorine and hydrogen sulfide, reduce heavy metals and naturally soften the water. Designed to fit almost all showers; simply screw on between the water pipe and your favorite shower head – No Plumbing Required!

Patent U.S. 9,901,655

  • CONVENIENT: Installation is easy! No plumber required, simply screw the filter housing onto the shower down pipe, then screw your showerhead onto filter housing. Our kit includes plumbers’ tape to ensure a tight secure fit. (Shower head not included)
  • BENEFICIAL: Enjoy the benefits of chlorine free shower water. Chlorine is knowns to dry skin, hair, and nails. Combat dry skin, flaking scalp and improve hair health all while taking your shower!
  • LONG LASTING: The internal filter cartridge lasts for about 1 years’ worth of showers. Replacement cartridges are readily available online or your local store.
  • PROTECTS: Chlorine can be absorbed through your skin while shower as well as breathing in chlorine gas through water vapor while showering. Our shower filter system easily removes the chlorine from your shower water, protecting your skin and lungs. All while you shower!
Shower filter w/box1 lb 4.4 oz3.5 in.3.5 in.8.6 in.  
Shower filter1 lb 4 oz  5.5 in.9.9 in.3.2 in.

Shower Filter Replacement Cartridge



Remove the shower head from the shower filter by turning counter-clockwise. Next, unscrew the shower filter from the shower arm by also turning counterclockwise. Unscrewing can usually be done by hand, but you may need a wrench if your shower head or filter is on too tight (use a soft cloth to protect the finish if using a wrench).


Open the shower filter by turning the bottom half counterclockwise until it separates from the top half. Remove the old filter cartridge and throw it away.


Place the new filter cartridge in its place, verify the rubber o-rings are in place and twist the two filter halves back together. 4. Place the shower filter back on the shower arm and turn clockwise to tighten by hand. Then twist on your shower head and also tighten by turning clockwise. Over time build up can deposit inside the filter and may hinder opening the filter. To counteract the build-up it would be best to run the shower filter under warm water and vinegar to break up any build up. If additional tightening is needed, use a soft cloth to protect the finish and tighten with a wrench. Then enjoy!